ST Fiber optic POF connector for 1.0/2.2mm plastic optical fiber cable(POF cable), which is widely used for industrial fiber optics communication.

Features: 

· High repeatability and low attenuation

· Field installable

· Standard crimp kevlar retention

· High performance Single-Mode and Multi-Mode connectors

· Low insertion loss: 

o Multi-Mode: < 0.34 dB typical

o Single-Mode: < 0.15 dB typical

Description:

The ST fiber optic connectors, available in both single mode and multi mode models, are specially designed for distribution applications and are fully compatible with existing ST type hardware. The connector was designed for small bend radius applications where space is limited.

High quality, pre-polished and pre-radiuses zirconia ceramic ferrules are combined with the latest engineering polymers and metals to produce the ST connectors. Pre-polished ferrules minimize the polishing times and provide consistent ferrule end-face geometry. When combined with the appropriate termination kits and method, the connectors produce superior results both in the factory and in the field.

The ST adapters feature precision, low attenuation coupling, using polymer alignment sleeves in metal housing.

Specifications: 

Units Min. Max. Comments Durability ~dB - 0.1 FOTP-21A, 1000 cycles, cleaning every 100 cycles Temperature range: storage operating ºC ºC -40 -40 +80 May be further limited by cable specifications +80 May be further limited by cable specifications Thermal shock ~dB - 0.1   -40 to +60 /, 10 cycles Temperature cycling ~dB - 0.1   -40 to +80 /, 40 cycles Humidity cycling ~dB - 0.1 per FOTP-5 +60/C at 95% RH for 504 hours Cable retention ~dB - 0.2 per FOTP-6, 40lb. load without adhesive ST Connector Remake: Dimensions are in inches/mm

We supply a wide range of the ST fiber optic connectors and ST fiber cable products, which are strictly tested before and after production.  Besides standard ST fiber connectors, we can also customize various fiber optic connectos according to customers' needs.